The use of biodiesel has been promoted for the past decade as a substitute for fossil-based diesel fuel. However, it has become evident that its production competes with food production by engrossing cropland. To overcome this Corma has developed a process that uses 2-methylfuran which currently is isolated (280 × 103 tonnes per year) from nonedible biomass ( Angew. Chem., Int. Ed. 2011, 50, 2375−2378). The first step is the trimerization of 2-methylfuran which takes place in water mediated by sulfuric acid in 94% yield. The trimer is then subjected to hydrodeoxygenation using a mixture of Pt/C and Pt/TiO2 and 5 MPa of hydrogen in 97% yield. Of particular note was the use of no organic solvent in the process. This route opens new routes for the production of high-quality diesel from waste biomass.
High-quality liquid fuels are obtained from non-edible carbohydrates by energy-efficient processes. 2-Methylfuran, produced by hydrogenation of furfural, is converted into 6-alkyl undecanes in a catalytic solvent-free process (see scheme with 6-butylundecane). A diesel fuel is produced with an excellent motor cetane number (71) and pour point (−90 °C) and with global process conversions and selectivities close to 90 %.
Production of High-Quality Diesel from Biomass Waste Products†
AuthorsProf. Dr. Avelino Corma, ET AL
5-hydroxymethylfurfural (0.500 g, 3.95 mmol) was dissolved in 2-methylfuran (2.00 g, 24.4 mmol) at room temperature, Amberlyst-15 (50 mg) was added as catalyst, and the reaction mixture was stirred for 24 h at room temperature. Then, the catalyst was filtered out and washed with ethyl acetate. The filtrate obtained was concentrated under vacuum and the residue was purified by silica gel column chromatography (95 : 5 hexane : ethyl acetate changing to 70 : 30) and 5-[bis(5-methyl-2-furanyl)methyl]-2- furanmethanol was obtained (0.921 g, 3.39 mmol, 86% yield).
Synthesis of trissylvylmethane (2,2′,2”-methylidenetris[5-methylfuran]) from 2- methylfuran (Sylvan) and 5-methylfurfural employing a 5 : 1 molar ratio of 2- methylfuran and 5-methylfurfural in presence of para-toluenesulfonic acid as catalyst.
In a 1-L three-neck round-bottom flask, equipped with a reflux condenser and a mechanical stirrer, 2-methylfuran (Sylvan, 600 g, 7.25 mol) and para-toluenesulfonic acid (13.8 g, 80.1 mmol) were placed. Under stirring 5-methylfurfural (160 g, 1.45 mol) was added at a rate of 120 mL/h at room temperature. The reaction mixture was stirred at 50 ºC until a total reaction time of 6 h. The aqueous phase was separated and discarded. The organic phase was treated with NaHCO3 and with MgSO4 and the excess 2-methylfuran was distilled off with a rotary evaporator. Distillation provided the desired product 2,2′,2”-methylidenetris[5-methylfuran] as a colorless liquid in 97% purity (120 ºC, 2 HPa; 365 g, 1.35 mol, 93% yield). A distillation residue of 49.1 g was obtained. 1 H NMR (300 MHz, CDCl3) δ = 5.99 (d, J=3.1, 3H), 5.93 – 5.89 (m, 3H), 5.39 (s, 1H), 2.27 (d, J=0.8, 9H).- 13C NMR (75 MHz, CDCl3) δ = 151.4, 150.7, 107.8, 106.2, 39.1, 13.6.
All about Drugs, live, by DR ANTHONY MELVIN CRASTO, Worlddrugtracker, Helping millions, 9 million hits on google, pushing boundaries,2.5 lakh plus connections worldwide, 17 lakh plus VIEWS on this blog in 214 countries, The views expressed are my personal and in no-way suggest the views of the professional body or the company that I represent, USE CTRL AND+ KEY TO ENLARGE BLOG VIEW........................A 90 % paralysed man in action for you, I am suffering from transverse mylitis and bound to a wheel chair, With death on the horizon, nothing will not stop me helping you, except God